PVC frames made with a “Rehau” profile with double gasket with 5 chambers. A square-shaped aluminium cover is applied on the outside.
The profiles can be mass-coloured or coated (film-coated); the surface coating of the profiles is obtained by hot gluing acrylic and laminated films structured to be resistant to light and abrasions. These films can be in RAL colour and wood decoration. The aluminium cover is powder coated and is available with RAL colours and wood decoration.
Fixed window frame with Z section 74 x 62 mm (fin 39 mm).
Turn sash 72 x 82 mm section.
Standard Roto NT hardware with tilt and turn and lever rod. Complete with anti-burglary striker plates and pawls along the entire perimeter.
Double abutment sealing profile, double gasket; glazing bead with a choice of two shapes: rounded or squared; drainage through holes in the lower crosspiece and external holes covered by caps, threshold with thermal break in anodised aluminium and polyamide on French windows.
Use of low-emission single-chamber double glazing with Argon gas and warm edge ducts as standard, in accordance with the current regulations. Of variable thicknesses and types (solar control, safety, acoustic, satin …) according to requirements.
Thermal insulation achievable up to UW value of 1.06 W/m2K.
*Calculated thermal values (according to the standard UNI EN ISO 10077-1 and 2), with Uf = 1.3 (W/m²K), low-emission double glazing with warm-edge duct (warm edge) and Ug value = 1.1 (W/m²K) best thermal insulation value referring to the double glazing
Starting from 31 dB for windows based on glass noise reduction values up to 45 dB.
To enhance your knowledge about our range, Giemme provides product technical drawings, a tool to increase the opportunity for users and professionals to immediately check sizes and solutions adopted.
Have you not found the answers to your questions?
Our team is available to hear and answer your questions during the following hours:
Mon – Fri 8.30-12.30 / 15-19
Saturday 8.30-12.30 (Except Summer season)